Ti Seatpost V2

New Internal Clamp Ti Seatpost

No better, no worse, just…different. Our newest Ti seatpost option features an internal clamp rather than the classic external bolt design. This post is only available in 25mm setback with a brushed finish and black clamp innards. The finish matches that of our three production titanium frames for more aesthetic appeal.

Specs
  • 3/2.5 Seamless Titanium
  • 330mm length
  • 27.2, 30.9, 31.6mm
  • 220g
Pricing

$169.95

Component Care

My wedges are stuck and I can’t readjust the tilt, what gives?

It’s not difficult for the wedges to go crooked during installation, and if torqued crooked they can be a challenge to remove by hand. The best method is to remove the outer clamps, angle the bolt downward on the back side of a wedge, and give it a light tap to free the wedge. Then you can free the opposite wedge in the same manner with a similar¬†implement. We strongly recommend using anti-seize in the installation to prevent galling.

Where To Buy

Dealers

Find a Dealer

Direct

Contact Carver